16
Loopback Testing
The iMcV-FiberLinX includes Loopback testing functionality, which loops
back all frames arriving on the fiber port (except for the device’s manage-
ment traffic). This is helpful when troubleshooting standalone units. When
in Loopback mode, iMcV-FiberLinX drops the link on the twisted pair port.
Serial Configuration/Telnet Session
The following are instructions for serial configuration (including VLAN
configuration) and using Telnet sessions and DHCP.
Basic Device Configuration
Main Configuration Screen
Press
Enter
, at the prompt, to display the main configuration screen. The
following displays are available:
Saved Values
(displays changes made during current session)
IP Address
(must be assigned during initial configuration)
Subnet Mask
(must be assigned during initial configuration)
Default Gateway
Server IP Addr
(for the TFTP server)
New Prom File
(firmware file name)
Current Values
(displays values currently in use)
IP Address
(IP address of SNMP agent)
Subnet Mask
(mask to define IP subnet agent connection)
Default Gateway
(default router for IP traffic outside subnet)
Server IP Addr
(for the TFTP server)
New Prom File
(firmware file name)
NOTE
Configuration screens may very depending on PC settings. On some screens,
TX =DATA port and FX = OPTICS port.
NOTE
Reboot the Telnet session for changes to take effect. To reboot, type the
word
reboot
at the prompt on the main configuration screen, or power cycle
the chassis.
If a Delete key is not available, use the
F2
key.
Содержание iMcV-FiberLinX
Страница 1: ...iMcV FiberLinX Operation Manual ...
Страница 2: ...Notes ...
