imagistics DL650, Руководство по эксплуатации

Страница: 245 / 344

Shortcuts 12-5
Shortcuts
Transparency Interleave
(p. 9-15)
1 First, load the same size copy paper as the transparencies in any regular tray.
2 Insert one transparency sheet at a time into the Multi-sheet bypass tray.
3 Touch
APPLI.
to display the Application selection screen.
4 Touch Transparency Interleave to display the Transparency interleave screen.
5 Touch Blank Sheet Interleaving or Copy Sheet Interleaving , unless your choice is
already highlighted.
6 Touch
OK
to return to the Application selection screen.
7 Make additional selections.
8 Touch
OK to return to the Basic screen with the required print quantity of [1]
automatically selected.
9 Position the original face up on the EDH (Electronic Document Handler) tray or face
down on the platen glass.
10 Press [ Start ]. When copying is completed, press [ Panel Reset ] to reset the machine.
Image Insert
(p. 9-17)
1 In preparation, note the page number locations of the images you will be scanning
from the platen glass.
2 Touch APPLI. to display the Application selection screen.
3 Touch Image Insert to display the Image insertion number setting screen.
4 Enter up to 30 page number locations, touching
SET
after each entry.
5 When all page number locations are entered, touch
OK
to restore the Application
selection screen.
6 Make additional copying selections, or touch OK to return to the Basic screen. The
Store mode is automatically selected.
7 To start scanning, position the regular originals face up on the EDH tray, then press
[
Start
].
8 After the originals on the EDH (Electronic Document Handler) tray are scanned, enter
the print quantity amount for the job.
9 Position one original at a time on the platen glass in ascending order of pagination,
i.e., 1~n.
The platen glass originals can be paste-ups, graphs, photos, newspaper articles, or
any non-standard document.
10 In turn, press [ Start ] to scan each original from the platen glass.
11 Touch
STORE
to exit the Store mode.
12 Press [
Start
] to combine the non-standard images scanned from the platen glass with
the regular images scanned from the EDH (Electronic Document Handler). When
copying is completed, press [
Panel Reset ] to reset machine.
DL650us12v1.fm 5 ページ ２００１年１１月１４日 水曜日 午後３時３２分