imagistics DL650, Руководство по эксплуатации

Страница: 143 / 344

Output Modes 7-15
Output Modes
Folding and Stapling & Folding Modes (continued)
1 Close the EDH securely, then press [
Panel Reset
].
2 Touch
OUTPUT APPLI.
on the Basic Screen to display the Output Mode Screen.
3 Touch
STAPLING & FOLDING or FOLDING
, as desired.
NOTE: Selecting FOLDING or STAPLING & FOLDING will automatically switch the output tray to Booklet
tray. Notice that the arrow pointing to the MAIN TRAY shifts to the Booklet tray.
4 Touch
OK
on the Output Mode Screen. The Basic Screen will be restored and the
selection made in the output mode will be reflected in the OUTPUT icon area.
5 Select additional copying features, as required.
NO COVER SHEET
of Booklet is automatically selected. To change this selection, touch
APPLI.
on the Basic Screen to display the Application Selection Screen, then touch
Booklet twice to display the Booklet Mode Selection Screen to make another selection
or to release the setting.
6 Enter the desired print quantity.
7 Position originals in the EDH. When using Store mode, see p. 6-35 to p. 6-37.
NOTE: When loading originals, heed the following limits on capacity:
Folding mode:
12 pages or less for simplex copying
6 pages or less for duplex copying
Stapling & Folding mode:
80 pages or less for simplex copying
40 pages or less for duplex copying
Exceeding the above capacity limits may cause trouble in the finisher.
8 Press [
Start
].
CAUTION
When the Booklet tray capacity is exceeded, the finisher will cease operating. To avoid this, select the
appropriate print quantity from the specifications shown on p. 7-13.
DL650us071v1.fm 15 ページ ２００１年１１月１４日 水曜日 午後３時１２分