imagistics DL650, Руководство по эксплуатации, Страница: 119 / 344

Basic Operations 6-39
Basic Operations
Interrupt Mode (continued)
2 Remove any document from the platen glass or from the EDH, if present.
3 Place new original(s) on the platen glass or in the EDH.
4 The copying settings in Interrupt mode are as follows.
Copy Mode : 1
s
1
EDH : ON
AES : ON
Lens Mode : 1:1 (1.000)
APS : ON
Print Quantity : 1
Finisher : Sort mode using Primary (Main) tray
Select other copying features that are compatible with the Interrupt mode, if desired.
5 Press [ Start ].
6 When Interrupt copying is completed, press [ Interrupt ] again to return to the settings of
the initial job.
7 Replace the initial original, then press [
Start
] to resume copying.
NOTES: 1 In Reserve mode, pressing [Interrupt] before the copier finishes scanning originals of the reserve job
will clear the settings selected for reserve job.
2 When [Mode Check] is pressed during Interrupt Copying, the information displayed reflects the initial
copy job settings. Check mode will not display Interrupt copy job information.
DL650us063v1.fm 39 ページ ２００１年１１月１４日 水曜日 午後３時１０分