imagistics DL650, Руководство по эксплуатации

Страница: 225 / 344

Program Memory 10-5
Program Memory
Job Recall (continued)
1 Place original(s) as required for the job you are about to recall.
2 Press [
Program Memory
] to display the Job No. Selection Screen.
(See sample screen, previous page.)
3 Touch a Job No. key to select a job you want to recall, and to highlight the key.
If required, scroll with the arrow keys to reach the desired Job No. key (1~30).
To cancel the recall mode, touch
CANCEL
to return to the Basic Screen.
4 Touch
JOB CHECK.
The Job Recall Check Screen displays to enable you to review the
settings. Touching
CANCEL
on the Job Recall Check Screen returns to the Job No.
Selection Screen.
(See sample Job Recall Check Screen, previous page.)
5 When the desired Job No. key is highlighted, touch
OK
to read the settings of the
selected job, and to return to the Basic Screen.
To cancel the job, press [
Panel Reset ].
6 Press [ Start ].
NOTES:
1
A locked job is indicated by a lock icon on the Job key number.
2 Only the Key Operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the Key Operator.
4 A blank key indicates that no job is stored under that key.
5 Program Memory entries can be recorded on the Program Memory Form included at the end of this section.
DL650us10v1.fm 5 ページ ２００１年１１月１４日 水曜日 午後３時２５分