Image Vault PRO COMMAND, Руководство пользователя

Страница: 7 / 57

7 Image Vault ® PRO Command
2.2 Rear Panel
A AC Power Input. Standard 3-prong IEC inlet-Auto Sensing (115 V
AC
or 230 V
AC
at 50/60 Hz).
B Power Supply fan.
C Power Supply Switch. Use this switch to completely remove power. Turning this switch on does not automatically start the recorder
(refer also to Front Panel Power Switch).
D USB Ports. Keyboard may be attached for service purposes, but otherwise unused.
E POS Port 1. Male DB-9 jack. POS Serial Port 1 for capturing serial data from journal printing devices such as cash registers at point-
of-sale (POS), ATMs, intelligent safes, alarm panels, access control systems, or other serial printing devices.
F DVI-I port. Not used.
G USB Interface. The USB ports may be used with removable “thumb drive” devices and external hard drives in much the same manner
as the CD drive to copy video from the DVR or load updates onto the DVR.
H USB Interface. The USB ports may be used with removable “thumb drive” devices and external hard drives in much the same manner
as the CD drive to copy video from the DVR or load updates onto the DVR.
I Microphone Jack (pink). (Unused)
J Speaker Jack (green). 1/8” TRS jack audio output, you may connect a speaker for local audio playback.
K Auxiliary Signal Input(light blue). (unused)
L External Inputs. Female DB-25 jack (black). Use this port to for dry contact inputs.
M Video Capture. The number and arrangement of video connections depend on the number of analog video inputs and type of capture
card. Refer to Sections 3.1 through 3.6 for details.
N Audio Capture. Female DB-9. Refer to Section 3.5 for further details.
O Video Out: Public View Monitor (PVM) BNC connector. (Only bottom one used)
P PS2 Port. Connect your PC Mouse to this port to operate the DVR locally.
Q POS Port 2. Male DB-9 jack. POS Serial Port 2 for capturing serial data from journal printing devices such as cash registers at point-
of-sale (POS), ATMs, intelligent safes, alarm panels, access control systems, or other serial printing devices.
R Video Port. Male DB-15 jack (blue). Connect your SVGA monitor to this port.
S Network Interface. This RJ45 port is used for Ethernet (10/100/1000-Base-T) communication. The DVR may be networked to a playback
PC through a network LAN or via peer-to-peer network connection using the network crossover cable provided.
T Network Interface. This RJ45 port is used for Ethernet (10/100/1000-Base-T) communication. The DVR may be networked to a playback
PC through a network LAN or via peer-to-peer network connection using the network crossover cable provided.
U RS 485 / PTZ Control / Alarm Output. Female DB-9 jack (black). Refer to Section 3.4 for further details.
V RCA connector. Not used.
W Chassis Fans.
A C D E F G H
J I K L M
N O
P Q R S U
V
B
T
W W