manualshive.com logo in svg

Image Vault PRO COMMAND, Руководство пользователя

Поделиться
Скачать
Image Vault PRO COMMAND Скачать руководство пользователя страница 53

53

Image Vault

®

 PRO Command

A.7 Lost 

Password 

This is only a problem if the Service level password is lost.

• 

If a user password is lost, delete the user and re-enroll the user with a new password.

• 

If the Service password is lost, contact Image Vault Technical Service.

A.8 Power 

Loss 

These are general steps. No matter how obvious they may seem, check each one.

• 

Check your product is switched on.

• 

Check that your UPS is switched on.

• 

Check that power cords are fi rmly connected at both ends.

• 

Verify the AC outlet has power.

• 

Check that you are not connected to a switched power outlet.

• 

Check your circuit breaker.

• 

If you can verify that you have power to the DVR, press the Reset button on your DVR.

• 

Contact Image Vault Technical Service if you are unable to fi nd the problem. 

APPENDIX B: FACTORY DEFAULTS

The following items* may be edited from these defaults:
Auto-Detect All Cameras ..................................................................................................................................................OFF
Motion Detection (all available cameras) .................................................................................................................... ON
Image Capture Rate ..................................................................................................................1 Image/Camera/Second
Quality Factor.........................................................................................................................................................3 (Medium)
Image Resolution .....................................................................................................................................................320 x 240
Camera Titles .............................................................................................................................“Camera 1” to “Camera 16”
Daylight Savings Time ........................................................................................................................................................ ON
NTSC Output Switch Rate .................................................................................................................................... 4 Seconds
NTSC Camera Display ..................................................................................................................................................ALL ON
VGA Camera Display ....................................................................................................................................................ALL ON
Motion Display Grids ........................................................................................................................................................... ON
Time Zone ................................................................................................................................................................Pacifi c USA
Location Titles ....................................................................................................................................................................Blank
IP Address ................................................................................................................................................................ 192.168.0.1
Subnet Mask ........................................................................................................................................................... 255.255.0.0
Scheduled Recording .........................................................................................................................................................OFF
Record During Remote Connection .............................................................................................................................OFF
Audio Recording ..................................................................................................................................................................OFF
External Inputs .....................................................................................................................................................................OFF
Data Stream ...........................................................................................................................................................................OFF
Idle Time to Hang Up ...........................................................................................................................................10 Minutes
Continuous Timeout.............................................................................................................................................10 Minutes

*This is not an exhaustive list.

For a complete list of the POS Interface data devices that are directly supported by your DVR, check www.image-vault.com. If you need support for a device that is not 
listed, contact Image Vault Technical Service at 1-888-462-4382.

Содержание PRO COMMAND


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды