Mobile DVR - Installation Manual
22/47
6.
Put two screws on each side to secure the position of HDD.
7.
Close the top by sliding the cover.
8.
Hold the HDD and slide it gently into the slot until it stops.
9.
Put removable HDD rack key and turn it to left to lock.
10. Installation is now completed. Turn on the DVR. If it is the new HDD or the HDD that has been used in other DVR or PC, DVR will ask
you to format the HDD in order to use in our system. To format the HDD, press ENTER button or if you have important images or data,
press ESC and back up the data before you use.
CAUTION
Your DVR is now ready to operate. The DVR cannot be turned on if the Hard Disk Drive door is not locked. If after installing
the unit properly but the DVR displays ‘HDD NOT FOUND’ on the top left corner of the screen, it is most likely that the HDD
is not installed properly or the HDD rack is not locked. Please make sure that the HDD rack is locked and restart the system.
If you still see the display, install the HDD again or contact your supplier.
