Mobile DVR - Installation Manual
24/47
5.2 Installing External HDD Device
In order to use and view the recorded material on PC, you will need to install one of following installation.
-
HDD Rack Frame Installation
-
Using IEEE-1394 External HDD unit installation
-
Using USB 2.0 External HDD unit installation
Each option requires optional items. Please read the below descriptions and choose one of following option.
CAUTION
The HDD installed in DVR is in MASTER mode. Please leave the jumper setting unless you ask to. Changing jumper mode
may cause the failure of reading HDD. Please see the below for each manufactures jumper setting.
Western Digital Jumper Setting Mode Seagate HDD Jumper Setting Mode
Maxtor Jumper Setting Mode
Hitachi Jumper Setting Mode
5.2.1 Using Hard Rack Frame
This option is recommended for users who use Removable drive. You need to make sure that
your PC has an empty slot to install HDD rack frame.
To use this option, user needs HDD Rack Frame. In order to view the image on the PC
conveniently, user can install the HDD rack frame in the PC. By doing this, you can directly insert
the removable HDD to the PC. No need to take the PC case off every time.
1. Unplug all the cables that connected to PC. Take off four or six screws at the back and push and slide the top case backward as shown
on below picture. The method to take the top case off is different for each case.
