Mobile DVR - Installation Manual
4/47
Important Safeguards
Must follow these details to prevent material damage beforehand.
Electric Safety
Warning
To reduce a risk of fire or electrical shock. Do not expose this product to rain or moisture.
Caution about lithium battery
Warning
1.
Change the battery after turning the power off of the DVR.
2.
Connect the polarity of the lithium properly while changing.
3.
Change with the same type of battery recommended by the DVR manufacturer.
4.
Follow the instruction from battery manufacturer to change the battery.
Safeguards
Warning
1. Use the adaptor, which is supplied or recommended by the supplier. It may cause fire.
2. Do not dismantle or assemble the product. It may cause malfunction or fire.
3. Do not touch the product with wet hands. It may cause malfunction or fire.
4. Matters must be ensured to a professional for installation. It may cause malfunction, electric shock or fire.
5. Consult the place of purchase if the need for installation arises. Delinquent installation may be the reason for malfunction, electric shock
or fire.
6. Ground applies to video products equipped with a 3-wire grounding type plug having a third (grounding) pin. This plug only fits into a
grounding-type power outlet. If grounding is not done, it may cause malfunction or electric shock.
7. Ground connection must not touch gas pipe, water pipe or telephone line. If grounding is not done properly, it may cause electric shock.
8. Prevent metallic foreign substance inside the product. It may cause malfunction or electric shock.
9. Do not spray insecticide or flammable spray while driving. It may cause fire.
10. Prevent water from entering inside electrical parts. Clean with a dry towel or malfunction or electric shock could result.
Caution
1. Use the power cord, which is supplied or recommended by the supplier. The internal fan rotates at high speed and may cause an
accident.
2. Do not drop, give strong vibration, or shock to the product. It may cause malfunction.
3. The air inhaler on each sides and the fan of the back panel must not be blocked during installation. The internal temperature of the
product would be greater than allowable and could cause malfunction or fire.
4. Do not touch the product or the power cord when there is thunder. It may cause electric shock.
5. Do not install the product near or on top of heating source. The internal temperature would be greater than allowable and could cause
malfunction or fire.
6. Do not install the product on inclined or unstable location or where vibration could be committed. It may cause malfunction.