ILX Lightwave MPS-8033 Series, Руководство пользователя

Страница: 102 / 112

Error Message Reference
7/01 MPS-8033
85
C H A P T E R
A
!
E−202 <PROGRAM DATA> will not convert to valid type.
E−203 Security violation, command is not available without clearance.
E−204 <PROGRAM DATA> suffix type is not valid.
E−205 <PROGRAM DATA> is not a boolean value or word.
E−206 <PROGRAM DATA> will not convert to a signed 16 bit value.
E−207 <PROGRAM DATA> will not convert to an unsigned 16−bit value.
E−208 <PROGRAM DATA> will not convert to a signed 32 bit value.
E−209 <PROGRAM DATA> will not convert to an unsigned 32−bit value.
E−210 <PROGRAM DATA> will not convert to a floating point value.
E−211 <PROGRAM DATA> will not convert to a character value.
E−212 <PROGRAM DATA> will not convert to a byte array pointer.
E−213 <PROGRAM DATA> is incorrect block data length.
E−214 <PROGRAM DATA> length exceeds maximum.
E−301 A <RESPONSE MESSAGE> was ready, but controller failed to read it. (Query
error).
E−501 Interlock disabled output.
E−511 Control error disabled output.
E−516 Incorrect Configuration for Calibration Sequence to start.
E−529 Hardware error disabled output.
E−532 Illegal Modulation Frequency chosen.
E−706 Auto−calibration cycle aborted.
E−720 to E−975 Invalid internal status reporting error.
Table A.2 Error Code Descriptions
Error Code Explanation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com