C O M M A N D R E F E R E N C E
GPIB Command Reference
56
MPS-8033
C H A P T E R
4
!
The LASer:MODulation:FREQ? query returns the value of the internal modulation frequency.
Parameters
None.
Response
The response data is internal modulation frequency in Hertz.
Notes
This command has the same effect as viewing the
INT MODULATION
indicators on the 8033 front
panel.
If the 8033 is operating in the CW mode and the LAS:MOD:FREQ? query is issued the response is
"0 HZ".
Examples
"
LAS:MOD:FREQ?
"response: 270 HZ, indicates the 8033 is operating in the 270 Hz pulse
modulation mode.
The LASer:MOD? query returns the modulation mode.
Parameters
None.
Response
The response data is the modulation mode (CW 160 Hz to 15 kHz).
Notes
This command has the same effect as viewing the
MODE
LEDs on the 8033 front panel.
Examples
"
LAS:MOD?
" response: 1000 HZ, indicates the 8033 is operating in the 1000 Hz pulse modulation
mode.
"
LAS:MOD?
" response: CW, indicates the 8033 is operating in the continuous wave mode.
The LASer:OUTput command turns the laser output on or off.
Parameters
The <nrf value> is 0 = OFF, and 1 = ON. Substitute values are shown in Table 3.4.
Notes
This command has the same effect as pressing the
(OUTPUT) ON
switch on the 8033 front panel.
Following the LAS:OUT ON command a
two second delay
period begins (indicated by the
(OUTPUT) ON
LED flashing). After the delay the laser will be turned on and the output on LED will
become fully illuminated. Use the LAS:OUT? command to query the output status.
The LASer:OUTput OFF command is executed immediately.
Examples
"
LAS:OUT ON
" action: Starts the laser output on sequence. The output will be enabled two
seconds after issue of the command.
"
LAS:OUTPUT 1
" action: Starts the laser output on sequence. The output will be enabled two
seconds after issue of the command.
"
LAS:OUT OFF
" action: Turns the laser output off.
LASer:MODulation:FREQ?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
LASer:MODulation?
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
LASer:OUTput
C
OMMON
D
EVICE
D
EPENDENT
F
RONT
P
ANEL
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Содержание MPS-8033 Series
