RJ150-30 / Operations and Maintenance Manual
Mobile Aircraft Air Conditioner
Trailer Mounted, Cool Mode Only
______________________________________________________________________________
JANUARY 20, 2004
SECTION 2 - 3
PAGE 1
CHAPTER 2
MAINTENANCE
SECTION 3
REMOVAL AND INSTALLATION
1. GENERAL
This Section contains instructions for removal and installation of the major
components within this unit. All major components can be electrically
disconnected and unbolted from the chassis assembly. Component circuit boards
can be unplugged, and mounting hardware removed.
Refer Supplemental Technical Manuals for engine/generator removal and
installation procedures appropriate for the unit being serviced.
•
RJ150-CUM-01: Cummins/Marathon Engine/Generator Set
•
RJ150-CUN-01: Cummins/Newage Engine/Generator Set
•
RJ150-DZM-01: Deutz/Marathon Engine/Generator Set
•
RJ150-PKM-01: Perkins/Marathon Engine/Generator Set
WARNING
BEFORE PERFORMING ANY PROCEDURES, INSTALLATION OR REMOVAL,
ENSURE THE ENGINE/GENERATOR IS COMPLETELY DISCONNECTED TO
PREVENT ACCIDENTAL ENGINE START-UP. ENSURE NEGATIVE ("-")
BATTERY LEAD IS DISCONNECTED TO REMOVE START-UP POWER SOURCE.
2. AIR CONDITIONING SYSTEM:
The air conditioning components are accessible through the service access
doors and panels. However, for some larger components removal and
replacement, top canopy panel removal will be required to allow hoist/lift access.
All panels are designed for easy removal and replacement. (See Figure 1)