background image

Now that you're the owner of a new Sportsview Projector, 
you'll want to begin using it right away. The Sportsview Pro-

jector is extremely simple to operate, but, as with any other 
precision optical instrument, there is a right way and a wrong 
way of going about it. So read through this booklet carefully, 
with the Sportsview beside you, before you start projecting 

your transparencies. 

G E N E R A L 

D E T A I L S 

The Ilford Sportsview Projector will project any standard 2x2 in. 
miniature slide. Just load the magazine with up to 30 slides, fit it 
into the projector, and you're all set to give a complete slide-show, 
simply by operating the autochange lever. 

The Sportsview Projector has been designed as a complete unit, 

combining a first-class optical system, magazine loading, and a modern 
slide-changing mechanism. 

A new valve-base type lamp with a very high light output provides 

the illumination, and a scientifically computed mirror/aspheric con-

denser system and f/2.8 Rodenstock coated anastigmat lens combine 
to give a brilliant, needle-sharp picture. 

The magazine makes the Sportsview really simple to operate, 

because you load the slides before you start to project. This means 

that all you have to do is to operate the autochange lever when you 
want to change the picture, and your slide-shows will run with "pro-
fessional" smoothness. 

Spare magazines are readily available, so you can keep all your 

slides in magazines if you wish. The big advantage of this system is 
that your slides need never be handled, and they are always ready for 
instant projection. 

Содержание Sportsview













Отзывы: