Advanced functions/Save/Restore Function
23
Advanced functions
This section describes the additional functions of the user interface.
NoTE
The word “Live” appears in a red rectangle in the upper right corner of the main
screen. This means that the headend is checking evaluation data.
NoTE
In local configuration there are contents which are also displayed in
headend
> headend modUle liSt > detailS
Save/Restore Function
This allows the current configuration of the selected model to be stored in a text file (“txt”
extension) and then imported later. To access from the main menu, click on
headend >
headend modUle liSt > aCCeSS modUle > general > Save/reStore.
J
Save Function. Select the tab for the module for which you wish to save the configura-
tion, select
Save the ConfigUration
and
click on
reboot
.
J
Restore Function. Select the tab for the module from which you wish to import the
configuration, select
reStore the ConfigUration
and click on
reboot
. This
function can be used to streamline the configuration process for future stations.
Internet Access
The Internet access not only allows the headend to
access the Internet (for example to display its loca-
tion), but it allows an operator to access and con-
figure the headend from the exterior. To access from
the main menu, click on
headend > aCCeSS via
internet.
ConfigUre aCCeSS via internet:
select
the checkbox to activate this function and then con-
figure the headend access to Internet (IP address,
network mask, and default gateway).
J
maC addreSS:
headend identifier for the network connection.
J
USe dhCp to aSSign ip addreSS:
activate the checkbox so that the DHCP
server automatically assigns an IP address: Deactivate the checkbox to enter the IP
address, network mask and default gateway manually.
J
ip addreSS:
enter the IP address if the DHCP is not enabled.
J
network maSk
: enter the network mask if the DHCP is not enabled.
J
defaUlt gateway
: enter the default gateway if the DHCP is not enabled.
EN
