20
Basic installation and configuration
/Service Management
Service Management
Selection of input services
1)
To define the services to be emitted through the
output of the DVB-T output signal, go to
ServiCeS > ServiCe management.
In
the upper side of the
headend ServiCe
management
window there is a table
showing the services available in the input,
differentiated by modules.
2)
Click on the icon on the left of the row of each module (position 1 in the above figure)
to go to the list of input services.
a) To select a particular service, activate the checkbox in the
add
column ( 2 ).
b) When all the services of a module have been enabled for the output signal, click
on the
Save ServiCeS
button.
KEY
1
Selection of STC module.
2
Selection of service to the output signal (if the
checkbox is not displayed, the service has
already been selected at the output).
3
Service type.
Lock closed = encrypted.
Lock open = free.
4
Service: name of service (contextual menu
when passed with the cursor: information on
Service ID).
5
Input: module input number (contextual menu
when passed with the cursor: information on
Original Network ID and Transport Stream ID).
6
Original LCN. Logic Control Number emitted
by the operator.
