IKI M10066NA, Инструкция по установке и эксплуатации

Страница: 6 / 24

5
PRIOR TO INSTALLATION
Before you begin installing the heater, pay attention to the following
points in the heater:
•
Beware of the sharp edges of the stainless-steel mesh. Use a long-sleeved
shirt and protective gloves during the installation and once taking the heater
out of the cardboard box.
•
Read through this installation manual and the separate control unit manual
before you begin the installation of the heater.
•
ATTN! This manual must be left with the owner, manager or operator of the
Sauna after it is tested/used by an electrician.
•
The heater volume should be suitable for the sauna room volume Model
table in page 11 shows the recommended sizes for each heater power
output.
• A precondition for the given values is that the sauna room is well insulated.
Walls and ceiling are covered with wood panels.
• Check that supply voltage and amperes are available for the heater in the
building and main power supply.
• The breakers and the connection cables conform with valid regulations
and their dimensions are in accordance with.
• The location is suitable for the heater.