IKI M10066NA, Инструкция по установке и эксплуатации

Страница: 14 / 24

13
Operating the heater timer and temperature
• The heater is equipped with the thermostat to adjust the sauna
temperature and timer to control when the heating starts and and
stops. it is prohibited to bypass the the timer or the thermostat.
• To set the TEMPERATURE in the sauna higher you can turn the
thermostat knob clockwise (+) and to set the temperature lower turn
the knob counter-clockwise (-).
•
To set the TIME To turn the sauna on immediately turn the timer
switch past the first market area 0-1hr. Then turn the dial back until
you hear “click” sound. Then you have the heater turned on to 1hr
operating zone and the heating elements start heating up. Heater
will be then in operation for maximum 1 hr.
• The heater has “8+1hr” timer. That means that you can set the
heater to begin heating after a delay of up to 8hrs. If you tun on the
heater to “1-9hr” zone the heating will start automatically after the
selected delay time has elapsed
High temperature control (reset button)
• The heater has a build-in high limit control, which automatically will turn off the heater if the
temperature rises too high in the sauna. That limit control might also turn off the heater in case the
sauna stones have for some reason moved and exposed the heating elements. The elements should
then be carefully covered with the stones.
• To restart the heater, turn the timer first down to zero and then push the reset button firmly. The
button is located at the bottom part of the heater. If the heater will not start operating or
continues to shut off, contact IKI LLC for further assistance.