6
Warning
1.
Please read this Manual Book carefully and fully understand it before operation.
2.
In order to avoid the aging of the rubber parts, do not expose the machine in the
sunshine; do not deposit the machine in a moist place, it must be stored in a dry place
with good ventilation. Because of the multi functions, the machine is equipped with many
accessories, it must be cared by a special technician.
3.
This machine has been tested strictly before leaving our factory, but the operator must
obey our operation regulations. Please do not try to take apart and repair it by yourself, if
you meet with any faults, please contact our local distributors or our company.
4.
After using, always cut off connection with air compressor and recover all the pipe to its
original place.
5.
Do not lower than the min. air inlet required pressure. Do not exceed the max. air inlet
required pressure.
6.
Do not dismantle this machine by unqualified or unauthorized personnel. Otherwise will
avoid warranty.
7.
If you have any inquiries, please contact our local distributors or service offices
.
Transport and unpacking
When unpacking, check to make sure that all the parts are included. Refer to the
Assembly section, and the Assembly Drawing and Parts List at the end of this
manual.
For transport of the packaged product, refer to Fig below
Once the product has been unpacked, check that the instructions manual is there, that
the material is complete and there are no parts which have been visibly damaged.
If
any parts are missing or broken, please contact with local distributor as soon as
possible.
Remove the contents of the packages and place them in a storage
area
inaccessible to children or animals.
