Ikelite 6328.01, Инструкция по эксплуатации

Страница: 3 / 10

IKELITE #0184.1
Silicone Lube
IKELITE #0184.1
Silicone Lube
5
#6328.11 PRO-2800/SA-100 Ball-Socket Arm Package
PRO-2800 LED
Lite Head
SA-100 Ball
Socket Arm
Lube
#6328.12 PRO-2800/Flex Arm Package
Flex Arm
1/4-20 x 7/8”
Screw
Flex Mount
Shoulder Washer
Lube
Included in Conversion Package
PRO-2800 LED
Lite Head
Knurled Nut
Diagram A
PRO-2800 Arm Mounts
To add, remove or change an Arm Mount, the Power Cord must first
be removed from the Lite Head.
- To remove a
Flex Arm Mount , break apart the Flex Arm pop-beads
leaving the first pop-bead attached to the Flex Arm Mount -
Diagram A . Turn the Lite upside down. Insert a phillips screwdriver
into the Flex Arm Mount through the open pop-bead. Remove
Screw and slide the mount toward the back of the Lite Head to
remove.
When re-attaching, the recessed part of the mount should be slid
into the Lite Head first. Reverse procedure to add or re-attach -
Diagram B .
- To remove the SA-100 Ball-Socket Mount - Diagram C , turn the
Lite upside down.
Loosen the Ball Socket Clamp wingnut closest to the Lite Head and
rotate the clamp toward the back of the Lite Head. Insert a phillips
screwdriver into the Ball Mount hole. Remove screw and slide the
mount toward the back of the Lite Head to remove. Reverse
procedure to add or re-attach.
Flex Arm Mount
Cord
End
1/4-20 x 3/4”
Screw
Diagram B
1/4-20 x 3/4”
Screw
Diagram C
Ball Mount
PRO-2800
Lite Head
PRO-2800
Lite Head
SA-100
Ball-Socket
Arm
IKELITE #0184.1 IKELITE #0184.1
Silicone Lube
Ikelite Lube
PRO-2800 Power Cord Preparation and Attachment
1. Remove Cord Protector Cap from Power
Cord and lightly lube each Cord End o-ring.
Use
only Ikelite lube (supplied); other
lubricants may cause the o-rings to swell
and not seat properly.
2. Wipe off excess lube with a clean cloth.
Make sure there is no hair or debris on the
o-rings.
3. Make sure your Arm Mount is securely
attached to the PRO-2800 Lite Head. To
remove or attach an Arm Mount, see
Diagrams B & C above.
4. Attach one Cord End to the PRO-2800 Lite
Head - Diagram A . Either Cord End can be
used.
6
Power Cord
Cord
Cap
Power Cord
Cord
Cap
Cord
Cap
#4103.50
Power Cord
O-rings
Included in Conversion Package