E-6
6. Connections
Be sure not to apply power before making connections.
6-1. Power cable
Use DC12V (10.5V to 15V), or AC24V (± 10%) in both 60Hz and 50Hz.
* This installation should be made by a qualified service person and
should conform to all local codes.
6-2. Video output cable (BNC)
This is a video output terminal. To be use an ordinary video output, for
monitors, or switcher.
6-3. Test monitor output (MON.OUT)
• Image output terminal used when installing the camera.
• By using the accessory cable to connect to the VIDEO IN of the monitor
or the image input terminal, it is easier to carry out positioning and
focusing.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
