E-7
7. Angle and Lens adjustment
7-1. Angle adjustment
Before doing this, the clear dome cover has to be
removed.
●
Remove the dome cover
Turn the black section of the dome cover in a
counterclockwise direction to remove.
Pay attention not to drop a dome cover while doing
this.
Note: When imaging in a horizontal direction, the
black section of the dome cover may be imaged
so that part of the image is missing. Adjust the
angle of vision in a horizontal direction so that
the dome cover is not imaged.
7-2. Vari-focal lens adjustment
To re-direct lens, loosen the lens fixing screws for elevation.
Adjust the zoom knob for framing and angle, and a focus knob for
focusing.
Using those two knobs, adjust the lens to have desired framing, angle
and focal point. Repeat this procedure a couple of times, so that you may
achieve the best result.
Once the desired settings have been achieved, tighten the screws to fix
the position.
Zoom knob
Focus knob
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
