E-17
10. Specifications
(1) Image Sensor: 1/3.2-inch DPS CMOS sensor
(2) Pixel Number: Approx. 1,230,000 pixels,1280(H)×960(V)
(3) Scanning system: 525 TV lines / 59.94Hz, 2 : 1 interlace
(4) Sync system: Internal synchronization (Crystal-lock)
(5) Video output: VBS 1.0Vp-p/75 ohms
MON.OUT 1.0Vp-p/75 ohms
(6) Resolution: Horizontal; 700 TV lines
(7) S/N ratio: Over 50 dB(p-p/rms)
(8) Minimum object illumination: 0.1Lx/F1.4 (VBS output : 50%)
0.14Lx/F1.6 (VBS output : 50%)
(9) Wide Dynamic Range: Built-in
(10) AGC: ON /OFF (Variable) Selectable
(11) White Balance Control: ATW(Indoor/Outdoor/AUTO1/AUTO2)/PUSH/
PUSHLOCK/MANUAL, Selectable
(12) Private Mask Setting: Built-in. Up to 16 areas
(13) Digital Noise Reduction: Built-in, On or OFF, Selectable
(14) Camera ID: 2 Line, up to 26 characters
(alphanumeric and symbols)
(15) Local Setup: By using the switch inside the camera, it is
possible to select and set items according to the
OSD.
Camera ID,AGC ON/OFF,ATW/PUSH/
PUSHLOCK/MANUAL selection and
adjustment,Wide Dynamic Range level,Back
Light Compensation On or Off,DNR ON/
OFF,Chroma level,P.Mask setting
(16) Video Flip function: Built-in. up or down, right or left, up and down or
right and left
(17) Lens: Built-in. Vari-focal Lens:
f2.8mm ~ 11.0mm
f9.1mm ~ 21.5mm
(18) Power Requirement: DC 12 V (+10.5V ~ + 15V)
AC 24 V±10% (50/60Hz)
(19) Power Consumption and
Current: Approx. 2.0 watts
(20) Operating Temperature and
Relative humidity: -10 to +50°C, RH 30% to 90%
(No Condensation)
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]