5
5. Setting
5-1. User setting
On this camera, user can make settings of picture quality, synchronization, identification etc. by himself or
herself. The setting menus are on-screen character display. (Refer to 8. Setup Menu.)
5-2. Setting switches and their functions
On the back of the camera there are the
pushbutton switches and display as
shown at the left.
Switch name
Main function
UP switch (U):
Setting item selection (up)
DOWN switch (D): Setting item selection (down)
RIGHT switch (R): Setting change and setting item selection (right)
LEFT switch (L):
Setting change and setting item selection (left)
ENTER (E):
Setting mode call on/off, setting entry
5-3. User setting menus
(1)
CAMERA ID
Up to 16 characters can be accepted and displayed.
Switching on and off the CAMERA ID function and presetting ID code
characters.
(2)
DAY/NIGHT
For selection of daytime/night monitoring
AUTO:
Day/Night selection luminance level is set automatically.
REMOTE:
MAKE:
Changes to Night (B/W) mode by closing terminal.
BREAK: Changes to Night (B/W) mode by opening terminal.
COLOR: Day (COLOR) mode
B/W:
Night (B/W) mode
(3)
SHUTTER
Setting of high-speed electronic shutter
Selection of high-speed shutter, display of the screen at VARABLE mode
(4)
LIGHT CONT.
Selection of AES or auto iris lens
Setting of back-light compensation as sub-menu
(5)
GAIN
Selection of AGC, HYP-AGC and fix
(6)
WHITE BAL.
Selection and setting of white balance system
ATW1:
2600K-6000K
ATW2:
2000K-6000K(when sodium lamp is used.)
AWC:
PUSH SET
MANU:
MANUAL SET
(7)
SYNC
Selection of synchronization system (INT, LL)
(It is impossible to select LL when the power is not synchronous.)
GENLOCK is selected automatically.
(GENLOCK is not displayed without external sync signal.)
It is possible to adjust the phase on sub-menu.
U
SET UP
D
E
L
R
