4
⑧
-
⑫
Camera setting function switches
Use them by referring to each operation item.
⑬
Video output terminal
Used to give out the video signal. Connect this to the video input terminal of a monitor, switcher etc. (To
be terminated with 75-ohm impedance.)
⑭
External sync signal input terminal
Used to receive the GENLOCK (general lock) signal. For external synchronization, input VBS or BBS
signal.
⑮
External sync signal 75-ohm termination switch
Set to HIGH position when the GENLOCK signal is looped with T-shaped connector. Usually, set at 75-
OHM position.
⑯
Power indicator
Green LED lights up when power is supplied to the camera.
⑰
Remote terminal
Used to input the sensor for Day/Night selection filter.
⑱
AC 24V/DC 12V power input terminal
Feed AC 21.6-26.4V or DC10.5-28V power.
This installation should be made by a qualified service person and should conform to all local codes.
