Ikegami FA-97, Руководство по эксплуатации

Страница: 62 / 156

3.2 Camera and Peripheral Installation and Connection
46
HDK-97C 1303 VER1 (U)
Connecting the Head s et
Two intercom lines (1 and 2) can be connected to the HDK-97C. Please select the engineer intercom or producer intercom
depending on the use. This section explains how to connect the engineer intercom to the camera.
1
Plug the headset connector into the INCOM-1
connector on the camera.
Camera rear view
INCOM connector
PGM2
PGM1
MIC
ON
OFF
PTT
PROD
BOTH
ENG
MIC
ON
OFF
PTT
PROD
BOTH
ENG
INCOM
PGM2
PGM1
INCOM
REAR TALLY INCOM SEL
CALL
INCOM1 INCOM2
OFF ACT
FRONT
REAR
1 RET 2
FRONT
INC1 INC2
1
2
4
3
1
2
4
3
㪠㪥㪚㪦㪤 㪠㪥㪚㪦㪤 㪈 㪉
Enlarged figure of
the rear connectors
CAUTION: Ensure that the volume is initially
set at a minimum level.
①
Plug the headset connector
②
Turn ON
2
Turn the INCOM-1 MIC switch ON.
Note:
The ENG INCOM connector and PROD INCOM
connector are compatible with the XLR series and
110-type phone jack connector.
CAUTION:
Do not set the volume of the intercom receiver to
near maximum level from the beginning. Setting the
volume too high with the intercom headset on your
ears may damage your eardrums.
Excessive sound pressure from the headset may cause
a hearing loss.
Reference:
Adjust the volume when the sound from the intercom
receiver is hard to hear or too loud. Refer to "5.
CAMERA SETTINGS and ADJUSTMENT",
"Adjusting Headset Volume" (page 75) for how to
control the intercom volume.
Attaching the Shoulder Belt
■ Attaching the Shoulder Belt
This camera is equipped with the hooks to attach the shoulder belt. Attach or remove the shoulder belt depending on how you use
the camera.
1
Open the attachment by pressing the upper part
of each shoulder belt tab.
①
Open the attachment.
②
Attach the shoulder belt.
Attachment will open
Press
Hooks
Hole
Camera right view
2
With the attachment open, align the hole in the
attachment with the hook on the camera and lift
the shoulder belt upward.
Make sure that the shoulder belt attachments are
securely attached to the hooks.
CAUTION:
If the shoulder belt attachments are not securely
attached to the hooks on the camera, the camera may
fall while you are carrying or operating it, resulting in
a damage to the camera or injury to the user.