Ikegami FA-97, Руководство по эксплуатации

Страница: 106 / 156

5.2 Settings from the Menu
90
HDK-97C 1303 VER1 (U)
Menu Item Initial Setting Setting Value De s cription, Remark s
MENU DATA
ALL VF
LENS SELECT
NUMBER
OFF OFF, NO.1
to
NO.8
Select the lens fi le number.
-If the lens code is obtained from the lens, (CODE SEL) is
displayed on the back of the lens number display.
-If AUTO SEL is ON, "AUTO SEL" is displayed on the back
of the lens number display.
-
NAME
(---------) 12 characters
Set the fi le name for each lens fi le.
Attaching the lens model name, etc. will make it easier to
know the correspondence between the lens number and lens. - -
( )
(---------)
AUTO SEL name display
section
Displays the lens name obtained from the serial lens. - -
EXTENDER
OFF
OFF, ON-1, ON-2,
ON-3, x0.8 CONV
Displays the extender state. - -
AUTO SEL
OFF OFF, ON
The lens fi le number is switched automatically according to
the model name obtained from the lens.
-
FILE SET
OFF OFF, MANUAL, AUTO See (Page 92) for the FILE SET usage method. - -
LENS TYPE
OFF
OFF, C.PORTABLE,
C.STUDIO, C.FIELD,
F.PORTABLE, F.STUDIO,
F.FIELD
To match the zoom tracking DTL operation characteristics
with the lens zoom characteristics, set the time of the lens used
in the camera.
OFF
：
Game tracking DTL is OFF.
C.PORTABLE
：
Canon portable lens
C.STUDIO
：
Canon studio lens
C.FIELD
：
Canon fi eld lens
F.PORTABLE
：
Fujinon portable lens
F.STUDIO
：
Fujinon studio lens
F.FIELD
：
Fujinon fi eld lens
Set by lens fi le (NO.1-8).
-
AUTO x0.8 CONV
OFF OFF, ON
Set automatic switching of the aspect ratio converter (X0.8)
internal lens.
If set to ON, it operates in linked motion with the output aspect
ratio of the down converter to carry out automatic switching.
-
LENS SERIAL I/F
ON ON, OFF Set whether to respond to the serial interface of the lens or not. -
LEVEL ADJUST
MASTER GAMMA
0.0 -100
to
+100
Sets the master gamma value.
The gamma value decreases in the direction of " -100" and
increases in the direction of "+100".
- -
MASTER PED
0.0 -100
to
+100
Sets the master pedestal value.
The pedestal value decreases in the direction of "-100" and
increases in the direction of "+100".
- -
MASTER FLARE
0.0 -100
to
+100
Sets the master fl are value.
The fl are value decreases in the direction of "-100" and
increases in the direction of "+100".
- -
DTL GAIN
0.0 -100
to
+100
Sets the detail amount.
The detail amount decreases in the direction of "-100" and
increases in the direction of "+100".
- -
ADJ CLR
READY
READY,
PUSH SET
→ CLR,
CANCEL
Returns the settings changed with LEVEL ADJUST to the state
prior to change as a group.
- -
PROCESS MODE
GAMMA TYPE
NORMAL NORMAL,CUSTOM1-5
Selects the type of gamma curve.
NORMAL: Normal gamma curve
CUSTOM1-5: Custom gamma curve
(Refer to "MENU(3/4)>CUSTOM GAMMA DATA" for
editing the custom gamma data.)
- -
MATRIX
OFF OFF, 1, 2, 3
There are independent settings for three channels of the matrix,
which can be switched.
- -
HI-LIGHT DTL
ON OFF, ON Possible to increase the DTL level of the highlight part. - -
GAIN
0.0 1
to
100
Sets the level value to be emphasized.
Level increases in the direction of +100.
- -
LIMIT
0.0 -100
to
+100
Sets the upper limit for the emphasized DTD level.
The "-100" direction lowers the limit. The "+100" direction
raises the limit and lowers the DTL level.
- -
SMOOTH KNEE
TYPE-1
OFF, TYPE1,
TYPE2, TYPE3
SMOOTH KNEE is a function to adjust the compression level
of the brightness signal with KNEE. It can be selected from the
following three setting types.
TYPE1 : The compression rate of brightness is low.
TYPE2 : The compression rate of brightness is medium.
TYPE3 : The compression rate of brightness is high.
- -
DTL V FILTER
OFF ON, OFF
If the V fi lter of the DTL is ON, the resolution feeling in
direction V diminishes, making it possible to obtain an image
with less noise. -