Ikegami FA-97, Руководство по эксплуатации

Страница: 59 / 156

3.2 Camera and Peripheral Installation and Connection
HDK-97C 1303 VER1 (U)
43
INS
T
ALL
A
T
IO
N
and CO
NNE
C
T
IO
N
3
Mounting and Removing the Viewfinder
■ Mounting the Viewfinder
This section explains how to mount the view fi nder (VF421HD) to the camera.
1
Make sure the camera power switch is OFF.
If the power switch is set to BS/CCU or EXT, turn it OFF.
2
Tilt the viewfinder eyepiece upward 90 degrees.
③
Slide the viewfinder
into the guide.
②
Tilt the eyepiece
upward 90 degrees.
3
Slide the rail on the rear of the viewfinder into the
guide on the front of the camera from the left-
hand side.
Slide the view fi nder until it clicks into position. When
the view fi nder is locked to the camera by the lock pin,
it clicks.
4
Connect the viewfinder cable to the viewfinder
connector on the camera handle.
Align the pins on the view fi nder cable with the
view fi nder connector and push until the connector
lock button clicks.
CAUTION:
Be careful not to catch your fi ngers in the lock lever
or guide-rail when attaching the view fi nder. Take
caution to avoid injury.
④
Insert the viewfinder cable into
the viewfinder connector.