Ikegami FA-97, Руководство по эксплуатации

Страница: 34 / 156

18
HDK-97C 1303 VER1 (U)
2.1 Camera and Viewfinder
① Shoulder belt hook
Attaches the optional shoulder belt.
② VF connector
Connects the VF cable
③
VF CONNECTOR LOCK button
Prevents the VF connector from being disconnected. To disconnect the VF cable, hold
down this button.
④ VF CABLE clamp
Secures the VF cable.
⑤ RET-2/MIC button
The RET-2 switch function or INCOM MIC switch function is allocated to this button. The
button selects the function or turns ON/OFF the function.
● When s et to RET-2
The view fi nder image is switched from the camera image to RET-2 image while this button
is pressed.
● When s et to INCOM MIC
Turns the intercom microphone ON/OFF when the INCOM FRONT VR SELECT switch on
the rear of the camera is set to "ENG" or "PROD". The intercom microphone is turned ON
while this button is pressed.
⑥ RET-1 button
Switches the view fi nder image from the camera image to RET-1 image. The view fi nder
image is switched to the RET-1 image while this button is pressed.
⑦ Breaker
A breaker (8A) for the camera
⑧
MIC CABLE clamp
Secures the microphone cable.
⑨ CAMERA connector
Connects the camera and CC with a fi ber cable. The SMPTE type (Lemo 3K series or
compatible product) connectors or Tajimi OPS series connectors can be used.
⑩
CAMERA CABLE clamp
Secures the fi ber cable (9.2mm diameter).
⑪ MEMORY CARD s lot
A slot for the memory card (SD card) used to store and summon up data. When using the
memory card, carefully insert the card in the slot until you hear a clicking sound.
When removing the card, carefully push in the upper part of the inserted card until you hear
a clicking sound. The card will move up, making it possible to remove it.
When not using the memory card, attach the cover to prevent dust from accumulating.
When storing or retrieving data, the access indicator on the side of the the slot is lit. Do not
remove the card if the access indicator is lit.
This could not only destroy the data on the card but also destroy camera data.
Reference:
The functions are allocated using
the menu. Refer to "5. CAMERA
SETTINGS and ADJUSTMENT",
"Menu Con
fi guration and
content" (page 87) for setting.
Reference:
Refer to "SAFETY
PRECAUTIONS" (page iv) for
how to handle and secure the
fi ber cable.