Ikegami FA-97, Руководство по эксплуатации

Страница: 101 / 156

5.2 Settings from the Menu
HDK-97C 1303 VER1 (U)
85
C
A
ME
R
A
SE
T
T
INGS an
d AD
JUS
T
ME
NT
5
Menu Configuration and content
The following lists the camera menu con fi guration.
■ MENU (Simple Menu)
The simple menu is the same as MENU (1/3) described below. Refer to items in MENU (1/3) for details of each menu.
■ MENU (1/3)
*1
Menu Item
Initial
s etting
Setting value De s cription, Remark s
MENU DATA
ALL VF
VF DISPLAY
DISPLAY MODE
2 OFF, 1, 2
OFF : The markers and characters are constantly OFF, and
only the warning messages are displayed.
1 : Only the markers are constantly displayed. Information
related to characters is displayed for 2 seconds during
function operation and when changing parameters.
2 : The markers and characters are displayed at all times.
VF DTL
35 1
to
100
Sets the VF detail amount. The detail amount decreases in the
direction of "0" and increases in the direction of "100".
MARKER/CHAR LVL
100 1
to
100
Sets the brightness levels of the markers and characters. The
brightness level gets dark in the direction of "1".
FRAME MARKER
OFF
ON-16:9, ON-14:9, ON-13:9,
ON-4:3, OFF
Sets the frame marker.
VF ASPECT
16:9 16:9, 4:3 Sets the VF aspect ratio.
SIDE MASK
OFF
OFF, ON-4:3,
ON-13:9, ON-16:9
Sets the side mask.
CONTRAST
50 0
to
100 Adjusts the side mask contrast level.
BRIGHT
60 0
to
100 Adjusts the side mask brightness level.
SAFETY AREA
ACTION ACTION, TITLE
ACTION
：
Area marker of 93% of the screen height and width.
TITLE
：
Area marker of 89% of the screen height and width.
SAFETY MARKER
ON-16:9 ON-4:3, ON-16:9, OFF Sets the safety marker.
CENTER MARKER
ON ON, OFF Sets the center marker.
FOCUS INDICATE
ON OFF, ON Only active when using the serial lens.
ZOOM INDICATE
ON OFF, ON Only active when using the serial lens.
AUTO VF ASPECT
OFF ON, OFF
Switches the VF aspect ratio in linked motion with the output
mode of the BS/CCU down converter.
ZEBRA INDICATOR
Overlaps the striped pattern signal on the image if the image
level has exceeded the individual DETECT LEVELS.
The zebra indicator goes ON/OFF with the VF special switch.
-Zebra 1 signal
：
Fine, slanted striped pattern signal fl owing
toward the upper right of the screen.
Use to control the tone of the entire screen.
-Zebra 2 signal
：
Thick, slanted striped pattern signal fl owing
to the lower right of the screen.
Used for controlling the tone of the subject,
such as face tone, etc
ZEBRA1 DETECT
100% 30
to
109% Sets the DETECT LEVEL of the 1st zebra indicator.
ZEBRA2 IND
OFF OFF, ON Selects whether there is a 2nd zebra indicator or not.
ZEBRA2 DETECT
70% 30
to
109% Sets the DETECT LEVEL of the 2nd zebra indicator.
ZEBRA IND LVL
78 Adjusts the overlap level of the zebra indicator.
*1 : It is possible to determine when loading MENU DATA from the SD CARD whether to read the entire MENU or to read only items related to VF.
The setting of an item having a checkmark is read.