Ikegami FA-55, Руководство по эксплуатации

Страница: 62 / 160

46
i i i
Connecting a Headset
Two intercom headsets (1 and 2) can be connected to the HDK-73. Please select the headset connector depending on the use. This
section explains how to connect using the Intercom 1 headset connector.
Plug the headset connector into the INTERCOM-1
connector on the camera.
2
Turn the INTERCOM-1 MIC switch ON.
Note:
7KH(1*,17(5&20FRQQHFWRUDQG352'
INTERCOM connector are compatible with the XLR
series connector.
CAUTION:
Do not set the volume of the intercom receiver to
near maximum level from the beginning. Setting the
volume too high with the intercom headset on your
ears may damage your eardrums.
Excessive sound pressure from the headset may cause
a hearing loss.
Reference:
$GMXVWWKHYROXPHZKHQWKHVRXQGIURPWKH
intercom receiver is hard to hear or too loud. Refer
to
"5. CAMERA SETTINGS and ADJUSTMENT
[Adjusting Headset Volume]" (P71) for how to
control the intercom volume.
Attaching a Shoulder Belt
■
Attaching a Shoulder Belt
7KLVFDPHUDLVHTXLSSHGZLWKWKHKRRNVWRDWWDFKDVKRXOGHUEHOW$WWDFKRUUHPRYHWKHVKRXOGHUEHOWGHSHQGLQJRQKRZ\RXXVHWKH
camera.
Open the attachment by pressing the upper part of
each shoulder belt tab.
2
With the attachment open, align the hole in the
attachment with the hook on the camera and lift
the shoulder belt upward.
Make sure that the shoulder belt attachments are
securely attached to the hooks.
CAUTION:
If the shoulder belt attachments are not securely
attached to the hooks on the camera, the camera may
fall while you are carrying or operating it, resulting in
a damage to the camera or injury to the user.
INCOM INCOM 1 2
ar ed re
e rear e r
C UTION nsure that the volume is initially
set at a minimum level.
① Plug the headset connector
Camera rear e
INT COM e r
② Turn O
OFF
EXT
POWER
CTI
ST N B
BS CCU
①
Open the attachment.
②
ttach the shoulder belt.
a me e
Pre
H
H e
Camera r e