Ikegami FA-55, Руководство по эксплуатации

Страница: 57 / 160

41
3
i i i
Mounting and Removing the Lens
■
Mounting the Lens
This section explains how to mount the lens to the camera.
%HVXUHWRSODFHWKHFDPHUDRQDWULSRGRURQDÀDWOHYHOVWDEOHVXUIDFHZKHQ\RXPRXQWWKHOHQV7KHOHQVFDQEHPRXQWHGWRWKH
+'.XVLQJWKH%7$PRXQWLQJPHWKRG
Before proceeding any further, remove the lens cap by pushing up the lens lock lever.
2
Align the pin of the lens with the notch of the
camera lens mount, and horizontally insert the lens
into the camera lens mount.
Support the lens with your hand to prevent it from
falling.
3
Secure the lens to the camera.
Push down the lens lock lever to secure the lens to the
camera. Make sure there is no play.
4
Connect the pigtail cable to the lens connector.
$OLJQWKHSLQVRQWKHSLJWDLOFDEOHZLWKWKHOHQV
connector and push until it is locked.
5
Secure the pigtail cable with the cable clamps to
remove any slack.
CAUTION:
Do not hold the lens housing to support the entire
FDPHUD$QH[FHVVLYHIRUFHDSSOLHGWRWKHPRXQWZLOO
cause damage.
③
②
Push down the lens lock lever
to secure the lens to the camera.
lign the notches and insert the lens
into the camera lens mount.
⑤
④
Secure the pigtail cable
with the cable clamps.
Connect the pigtail cable.