7
Pan Detection
If the system cannot recognize the pan, or if the pan has been
removed from the surface cooking area, the “replace pan”
animation appears in the cooking area display as a reminder. See
the following illustration.
If the pan is not placed within 30 seconds, the zone(s) will switch
Off.
If a Timer is running when a pan is removed, the countdown will
continue.
Control Lock
The Control Lock avoids unintended use of the surface cooking
areas.
If Control Lock is activated when power to the cooktop is off, the
cooktop is locked out, and the surface cooking areas cannot be
turned on by the cooktop touch controls.
If Control Lock is activated when power to the cooktop is on, all
keypads are locked out except for the On/Off keypad.
To Lock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds. After
3 seconds, a tone will sound and the indicator light above the
Control Lock keypad will light, indicating that the cooktop
controls are in the lockout position.
If the cooktop is in use when Control Lock is activated, cooking
will proceed as normal and any timers that have been set will
continue their countdown.
To Unlock Cooktop:
Touch and hold the CONTROL LOCK keypad for 3 seconds.
Performance Boost Function
This function allows you to increase the heat setting level above
the maximum heat setting 9 for 10 minutes or less.
NOTE:
Performance Boost function is available on the left rear,
right rear, and right front surface cooking areas.
To Use:
If you attempt to use Performance Boost on more than one
surface cooking area in the same zone, “P” will briefly flash in the
display and the first surface cooking area selected for
Performance Boost will automatically be set back to the highest
power available setting. The last surface cooking area selected
will be set to Performance Boost.
If you attempt to use the Performance Boost function on
elements that do not have the feature, 4 beeps will sound, and
the power level will remain the same.
1.
Check that the left rear, right rear, or right front surface
cooking area has been selected.
2.
Touch BOOSTER. “P” will appear in the display.
3.
After 10 minutes, “P” will no longer be visible in the display
and the Performance boost function will no longer be active.
The surface cooking area turns back to heat setting level 9.
NOTE:
The Performance boost function may automatically be
deactivated to keep the internal electronic components of the
cooktop from becoming too hot.
Zone 1
Zone 2
A. Surface cooking area 1
B. Surface cooking area 2
C. Surface cooking area 3
D. Surface cooking area 4
B
C
D
A
