IKEA GRILJERA, Руководство по установке

Страница: 29 / 64

ENGLISH 29
The electrical connection must be carried out
in accordance with the current standards and
laws in force.
Before connecting check that:
• The system and electrical sockets amperage
is adequate for the appliance maximum
power (see data label affixed on the back
of the cooker).
• The socket or system has an effective earth
connection in accordance with current
standards and prescriptions of the law.
All responsibility is disclaimed if this is not
complied with.
• The plug and socket or the multipolar switch
must be accessible after installation of the
appliance.
When connecting to the mains with a socket:
• Fit to the power cable a standardized plug,
suitable for the load which is indicated on
the data label. Connect the wires making
sure they correspond as shown below, and
remember that the earth wire must be
longer than the phase wires:
letter L (phase) = brown wire
letter N (neutral) = blue wire
symbol (earth) = green/yellow wire
• The power cable must be laid so that no
parts of it ever reach a temperature of
75 °C.
• For connecting do not use, adapters or
shunts as they could cause false contacts
resulting in hazardous overheating.
When connecting directly to the mains:
• Install a multipolar switch that can withstand
the appliance load, with a minimum
opening between the contacts of 3 mm.
• Remember that the earth wire must not be
cut out by the switch.
Electrical connection