slot
pushrod
21.) Solder the motor leads of the micro speed controller to the
motor. (follow the specific manual)
Use CA glue to mount the complete motor/gear box unit to the
motor carrier.
22.) Mount the servos into the die-cut openings in the fuselage
main former. Make sure to run the servo cables above the fuselage
former. The servo arms have to point to the fuselage wall.
23.) At the fuselage tail you have to cut exit slots for the push rods.
24.) Use CA glue to attach the quicklinks at one end of the carbon
fibre push rods. Insert them in a diagonally and 'click' them into the
rudder control arms.
fin / rudder
servo control arm
motor carrier
quicklinks
8
