Ikarus Config
Allows to change the basic (general) OSD settings.
•
Exit: Returns to the previous menu.
•
GPS baud-rate: GPS serial port speed.
•
OSD screen: OSD default screen. You can set a fixed screen or allow user to select it from the
R/C Transmitter.
•
Telemetry: Indicates whether the telemetry information is sent embedded in the video signal, or
using a Radio (TX) modem (XBee).
•
Canal control: Control channel mode
◦
Interruptor 2 (positions): Two-position switch.
◦
Interruptor 3 (positions): Three-position switch
◦
Rueda: Slider or Dial control on R/C transmitter.
◦
Mezcla 223: Channel mix mode with switches 2+2+3
◦
Mezcla 224: Channel mix mode with switches 2+2+2+2
•
WayPoint Range: Waypoint distance, after which you can move to the next waypoint.
•
Ruta ends: OSD behavior once they reach the last point of the route
•
Zona horaria: User time zone. It is used to correctly calculate the current time.
© Ikarus Team Sevilla 2010
Page. 46/60
