IKAR ANCHORAGE SLINGS, Инструкции по использованию и учету результатов осмотров

Страница: 16 / 104

16 17
•
distortion / disfigurement
•
excessive wear
•
checking the connectors for:
•
rust and pitting
•
cracks
•
distortion / disfigurement
•
excessive wear
•
functioning freely and correctly
•
correct alignment of the gate
•
excessive wear
•
functioning freely and correctly
•
correct alignment of the gate
•
checking the Anchorage Sling swaging on the wire rope versions for:
•
rust and pitting
•
cracks
•
Verformung
•
distortion / disfigured
•
excessive wear
•
secure and tight connection
•
checking the wear sleeve on the webbing versions for:
•
excessive wear
•
excessive damage
If any defects or damage is identified the Anchorage Sling should not be used. It should be taken to a competent
person responsible for the detailed recorded inspections for a thorough visual and tactile examination.
Detailed Recorded Inspections
•
should vbe carried out by a trained competent person to ensure the safety and integrity of the Anchorage Sling
•
recorded in the record table contained within these User Instructions;
•
be carried out on a regular basis. The frequency of the detailed recorded inspection should be deemed through
Risk Assessment taking into account legislation, equipment type, frequency of use, and environmental conditions,
which may accelerate the rate of deterioration and physical damage
•
be carried out on a regular basis. The frequency of the detailed recorded inspection should
•
be deemed through Risk Assessment taking into account legislation, equipment type,
•
frequency of use, and environmental conditions, which may accelerate the rate of
•
deterioration and physical damage
Maintenance and Storage
Maintenance
Maintenance of this IKAR GmbH Anchorage Sling must only be carried out by a trained and competent person,
who will:
•
ensure that NO alterations to the Anchorage Sling are made
•
clean the product using the following procedure:
•
using only warm water
•
using only mild detergent
ENGLISH