IKAR ANCHORAGE SLINGS, Инструкции по использованию и учету результатов осмотров, Страница: 15 / 104

15
•
be aware of hazards that may affect the performance or cause failure of the Anchorage Sling, such as:
•
extreme temperatures (below -15°C and above +50°C)
•
aggressive environmental conditions, including
•
sand & grit
•
cement
•
hot surfaces
•
naked flames
•
welding splatter
•
sparks
•
electrical conductivity
•
contact with
•
sharp edges
•
abrasive surfaces
•
chemicals
•
immediately stop using the product if it is exposed to any of the above or is damaged in any way until it
•
has been inspected by a competent person;
•
ensure that the Anchorage Sling is only used for a maximum period of 10 years after the date of manufacture
•
ensure that the date of first use is recorded in this instruction booklet.
•
should you resell this IKAR GmbH Anchorage Sling, it is essential that all instructions for use, maintenance and
periodic examination are provided in the language of destination.
Instructions for Pre-Use Check
Users of IKAR GmbH Anchorage Sling must carry out a pre use inspection before each and every
use:
•
checking the label for ligibility
•
cuts, tears and nicks
•
abrasion
•
fraying
•
thinning
•
heat damage
•
mould and paint
•
evidence of chemical & U.V light attack, which will be seen as discolouration, softening or hardening of the
webbing and/or rope
•
checking the stitch patterns for:
•
broken or abraded stitches
•
loosened stitching
•
pulled and loops of stitching
•
long tails of thread
•
checking the metal fittings for:
•
rust and pitting
•
cracks
ENGLISH