IKA RV 10 auto, Руководство по эксплуатации

Страница: 28 / 160

28
Technical Data
Operating voltage range Vac (100...240) ± 10%
Rated voltage Vac 100...240
Frequency Hz 50/60
Power input without heating bath W 100
Power input operation “standby” W 3.3
Speed rpm 0/5...300
Speed tolerance rpm ± 1(Set speed < 100 rpm)
% ± 1(Set speed ≥ 100 rpm)
Speed display digital
Dimensions of visible display area (W x H) mm 70 x 52
Display TFT-Display
Multiple languages yes
Right and left movement/ interval operation yes
Smooth start yes
Lift automatic
Lifting speed mm/s 50
Stroke mm 140
Setting of lower end stop mm 60, contactless
Head angle adjustable 0°...45°
Timer hh:mm:ss 00:00:00...99:59:59
Interval mm:ss 00:00...60:00
Integrated vacuum controller yes
Measurement range vacuum mbar (hPa) 1...1050
Adjustment range vacuum mbar (hPa) 2...1014
Measurement accuracy vacuum mbar ± 2 (± 1 Digit) if calibration is done at a constant
temperature
Adjustment accuracy vacuum mbar adjustable hysteresis (Two-position vacuum control)
mbar 1 (Speed-vacuum control, set value < 100 mbar)
% 1 (Speed-vacuum control, set value ≥ 100 mbar)
Measurement range of differential temperature K 7
Offset balancing range K ± 0.5
Interface USB, RS 232
Ramp programming yes
Distillation processes programmable yes
Remote control with accessory labworldsoft
®
Cooling surface (Standard condenser RV 10.1,10.10,10.2,10.20) cm 2 1500
Minimum cooling water flow rate l/h 30
Maximum cooling water flow rate l/h 100
Cooling water pressure bar 1
Cooling water temperature range °C 18...22, constantly
Fuse 2 x T1, 6 A 250 V 5 x 20
Perm. On-time % 100
Perm. ambient temperature °C 5...40
Perm. humidity % 80
Protection acc. to DIN EN 60529 IP 20
Protection class I
Overvoltage category II
Contamination level 2
Weight (no glassware; no heating bath) kg 18.6
Dimensions (W x D x H) mm 500 x 440 x 430
Operation at a terrestrial altitude m max. 2000 above sea level
Subject to technical changes!