background image

5

• 

Secure the device with the anti-tilt device to ensure stability 
while loading and unloading shelves and during operation. 
Ensure the anti-tilt bracket is properly fixed, in particular when 
the device is stacked.

• 

The feet of the equipment must be clean and undamaged.

Work with the device

WARNING

Do not start up the device if:

- it is damaged

- cable is damaged.

The device must have cooled down 

before loading/unloading. 

Do not move any loaded racks.

Heavy loads can lead to tilting of 

the device. Observe loading recom-

mendations for the shelves.

Never use the device for:

- heating food

- drying living beings

- heating room

WARNING

The safety temperature limit must 

be set in such a way that the maxi-

mum permitted temperature is not 

exceeded. Check the safety tem-

perature limit regularly.

The safety temperature limit must 

be set in such a way that the maxi-

mum permitted temperature is not 

exceeded. Check the safety tem-

perature limit regularly.

CAUTION

The area around the air outlet noz-

zle can get very hot at high operat-

ing temperatures.

Power supply/Switching off the device

• 

The voltage stated on the type plate must correspond to the 
mains voltage.

• 

The device can only be disconnected by pulling out the mains plug.

• 

Socket must be earthed

• 

Protect the device and accessories from blows and impacts.

• 

The device will automatically restart in mode B and C follow-
ing any interruption to the power supply.

• 

Protect the power cable against kinks.

• 

Check power cables at regular intervals for possible material 
fatigue.

• 

Mains cable should not come into contact with hot parts.

Heating

CAUTION

When high operating temperatures 

are used, the device may get very 

hot, particularly at the openings at 

the back.

Risk of burns caused by vapour or 

hot surfaces. Pay attention to the 

residual heat after switching off.

Accessories

 NOTICE

Use the locking brake when using 

the roller frame or roller stand.

• 

Safe operation is only guaranteed with the accessories de-
scribed in the “Accessories” section

• 

Only use 

IKA

 approved accessories!

• 

Use only original 

IKA

 spare parts!

• 

Check the device and accessories for damage before each 
use. Do not use damaged components.

Maintenance

• 

The device must only be opened by trained specialists, even 
during repair. The device must be unplugged from the power 
supply before opening. Live parts inside the device may still be 
live for some time after unplugging from the power supply.

Disposal instructions

• 

End users are obliged by law to return all used disposable and 
rechargeable batteries. Throwing them into the household 
waste is prohibited! Disposable/rechargeable batteries con-
taining harmful substances are marked with this symbol to in-
dicate that they must not be disposed of as household waste.

• 

The device, accessories and packaging must be disposed of in 
accordance with local and national regulations.

Содержание Oven 125 control - dry glass























Отзывы: