23
HS/KS260 0305
are turned off. The set target values are stored and are display-
ed digitally. They are adopted when the corresponding functions
are turned on. the set target values can be varied. After the
power has been turned off and back on, both functions must be
started again. The upper speed limit can only be set or changed
in operating mode
A
. You can recognice operating mode
A
by
the fact that
no
star is displayed in the menu bar display of the
time setting.
After the power has been interrupted, the device will no longer
automatically start up in operating mode
A
by itself any more.
After you have selected the operating mode and turned on the
device, the following process will be shown on the display.
a.)
All display elements in the digital displays are activated for
about 2 seconds.
b.)
The device type (left display) and operating mode (right dis-
play) are displayed for about 2 seconds.
c.)
After this, the set (ore stored) upper speed limit of the agita-
d.)
If the upper speed limit is fixed, the unit
1/min
in the left dis-
play changes to
OK
. The new time target value that is set or sto-
red in the right display (for example
3:58
) is displayed with an
indication of
h min
and a flashing
SV
.
e.)
The new speed target value that has been set or stored in the
left display (for example
130
) is then shown with the unit
1/min
and flashing
SV
.
f.)
By pressing the left or the right turn button, you can place the
agitator in operation with the stored value or the one that has
just been set. The actual speed and time values are then shown
in large format on the display. The actual value of the time set-
ting must be understood from this point onward as the time
remaining for the agitation process. If zhe remaining has reached
zero, the agitator stops its motion.
Operating mode B:
When the device is turned on, target values for speed and time
setting are adopted before the device is turned off (power OFF).
The upper speed limit that has been set is taken over from ope-
260
KS
A
230
SAFE
SV
I
min
/
A
230
SAFE
min
n
i
358
:
SV
SV
OK
I30
I
min
/
SV
min
n
i
358
:
SV
I30
I30
I
min
/
PV
PV
min
n
i
356
.
358
:
3106600c_HSKS260_052006:HS-KS 260 b-c 13.04.10 14:32 Seite 23
