10
max. 10 ˚
• Moving the device:
Empty all fluid in the bath before moving device from one
place to other place�
The device can be lifted up and moved by using the top
handles or the bottom handles�
It can also be moved on flat surface by lifting and pushing
the front of the device� It is easy to move the device with
the help of the wheels�
The angle of inclination should never be more than 10 º
at any direction when move the device!
Note:
The device must not be moved during operation�
After moving the device, you must wait at least one hour
before restarting the unit�
Fig. 11
Operator panel and display
Item Designation
Function
A
On/Off button:
Switch on/off the circulator�
B
LED, set:
The LED lights up at the same time as the set value is displayed�
C
LED, heating:
Indicate the heating function is activated�
D LED,
refrigerating:
The LED indicates the refrigerating function is activated�
E
LED display:
Display the settings and actual values�
F
“Menu” button:
Press it once: menu option is display�
Press it once again: back to working screen�
G
LED, lock:
Indicate the buttons are deactivated�
H
Lock button:
Lock/unlock buttons�
I
“OK / Pump” button:
Start/stop the pump function�
Confirm the menu options�
J
“Pump (+)” button:
Increase the pump speed setting�
Change the menu value setting�
K
“Pump (-)” button:
Decrease the pump speed setting�
Change the menu value setting�
L
“Temp” button:
Start/stop the tempering function�
M
“Temp (+)” button:
Increase the temperature setting�
Navigation, selecting the settings in the menu�
N
“Temp (-)” button:
Decrease the temperature setting�
Navigation, selecting the settings in the menu�
O
Adjustable safety circuit:
Adjust the safety temperature limit�
P
Fluid level indicator:
Indicate the fluid level (when the fluid level is too low or too high, the bottom or the
top LED segment change into red color)�
A
L
J
K
F
H
I
M
N
E
P
G
C
B
D
Fig. 12
O
