IKA C 2000 basic Скачать руководство пользователя

Страница: 40 / 94

IKA



-WERKE C 2000 basic / control

Ver. 04 08.07

3DJH

•

2SHUDWLRQ

configuration field

[ ]

3URWRFRO

Marking this option causes a protocol to be printed out for every experiment.

This also applies to the individual temperature measurement values during the

measurement. In addition, the temperature protocol is displayed in the info-

window for test parameters, see Section 9.1, “5-Info”.

[ ]

6DPSOHUDFN

A sample rack is connected and will be used.

6DPSOH

dialog box can no longer

be called manually. Instead it is activated by placing samples in the samples

rack or removing them from it. This ensures reliable management of large num-

bers of samples.

For more information on working with the sample rack, please refer to the

C 5020 Operating Instructions.

[ ]

%RPE,G

Decomposition vessels are automatically identified by their coding (DV detec-

tion). There is no manual entry of the code number of decomposition vessels.

See Chapter 7, “Preparing and performing measurements”. This selection is de-

activated when a device without automatic identification is being run.

[ ]

6DYHH[SHULPHQW

The experiment can be started again if it is interrupted before the ignition takes

place. The experiment parameters remain intact. Even if a test is interrupted

after ignition with the error message

1RWHPSHUDWXUHLQFUHDVH

, the test can still

be restarted. To restart the experiment, the decomposition vessel must be re-

moved from the measuring cell and suspended again.

[ ]

8VUGHIQDPH

Here you can specify whether you will enter the

6DPSOHQDPH

yourself in the

6DPSOHQDPH

entry field or in the

6DPSOH

dialog box, or whether the system will

automatically assign the

6DPSOHQDPH

. If this option is not selected, the system

assigns experiment numbers in the

6DPSOHQDPH

box.

[ ]

'LVSRVDEOHFUXFLEOH

This option reduces the value for extraneous energy by 50 Joules since no cot-

ton thread is used.

[ ]

5H,QLW

Before every measurement the system tests whether cooling water flowthrough

in the calorimeter is ensured and if the cooling water temperature is correct for

the current mode. If these conditions are not satisfied, the measurement is not

enabled. This option should only be used for major fluctuations in the tempera-

ture of the cooling water or with very low frequency of measurements.

[ ]

([SORVLY

This option is only valid for the C 2000, which is equipped with the C 60 calo-

rimeter conversion kit. The standard decomposition vessels C 5010 and C 5012

must not be used in this mode. In the

([SORVLY

mode, use exclusively the IKA



High-Pressure Decomposition Vessel C 62, or a Peters bomb modified by fitting

IKA



Electrode Set C 61.

The option can only be activated if DV detection is deactivated. The activated

option allows the use of up to 20 decomposition vessels per calorimeter and

changes the procedure for preparing and performing measurements (see Sec-

tions 7.3 and 7.4).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание C 2000 basic































































































Результаты поиска

Содержание C 2000 basic

Отзывы:

Похожие инструкции для C 2000 basic

Бренды по названию

Популярные бренды

IKA C 2000 basic, Руководство по эксплуатации

Результаты поиска

Содержание C 2000 basic

Отзывы:

Похожие инструкции для C 2000 basic

Бренды по названию

Популярные бренды