IKA
-WERKE C 2000 basic / control
Ver. 04 08.07
3DJH
If the system check was interrupted with
&DQFHO
, no measurements are possible. It
is also not possible to reach the maintenance menu. Canceling is useful if only ad-
ministrative tasks (library, simulation, or evaluation) are to be performed on the calo-
rimeter.
The interrupt is confirmed with
2.
; the system check is continued with
%DFN
.
If the system check still does not permit operation in the set operating mode after 3
minutes, it is possible to adjust the system to the appropriate mode corresponding to
the measured cooling water temperature with the
&KDQJH
button.
In this case a reference appears to the effect that there may be no valid calibrations
available for the selected operating mode.
UHDG\IRU
RSHUDWLRQ
EHUHLWVFKDIW
LQWHUUXSW
V\VWHPFKHFN
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com