7
MA300TS-0210
2. DO Display (DO [mg/L] / Saturation rate [%] setting)
Step 1. Turn the PACK MASTER power ON, and press on the O
2
Measurement Standby screen or DO
MEASURE screen.
The MENU screen opens, and “CAL” is selected (flashes).
Step 2. Press once.
The cursor moves, and “SET” is selected (flashes).
Step 3. Press .
The SETTING MENU screen opens, and “O
2
DISP SET” is selected
(flashes).
Step 4. Press three times.
The cursor moves, and “DO DISP SET” is selected (flashes).
Step 5. Press .
The DO DISP SET screen opens, and the selected setting flashes.
* The factory default setting is “DO mg/L”.
Step 6. Each time is pressed, the display changes as shown below.
<When DO mg/L is displayed>
<When SATUR-R % is displayed>
<When set to DO mg/L>
Step 7. When is pressed, the selected settings are saved.
The SETTING MENU screen opens.
