4
MA300TS-0210
3. Names and functions of each part
This device is shipped with part of the tubing parts removed so that excessive load is not applied on each part. Before
starting use, refer to the schematic drawing below, connect each part, and install the device. The tubing is manually
tightened with a luer fitting.
Do not use a tool when connecting the parts. Tightening with a tool could result in part
damage.
Securely tighten the parts by hand without using tools.
<Schematic drawing>
*
PACK MASTER and stirrer are sold separately.
The following photo shows the overall view, including the optional PACK MASTER (model: RO-105S), Stirrer (Model: KK),
and sample prepared by the user.
DO sensor connector
DO sensor
connector
← The model and serial number are
indicated on the cable.
Water
temperature
sensor
<Back panel of PACK MASTER>
<Oxygen (DO) sensor>
