Ihagee EXA IIa, Руководство пользователя

Страница: 9 / 44

3
Removing and replacing the
camera back
Turn milled ring (30) in the base of the camera
until red dots are opposite each other. Grip
the camera with both hands, with the back (29)
facing upwards and the pentaprism viewfinder
(12) pointing towards you. Press gently on the
back (29) with both thumbs and slide it out from
under the chrome-plated top capping, until
the red dot above the film gate (25) becomes
visible (Fig. 1). Then lift the back (29) out of its
guide channels.
To replace the camera back (29), insert it from
above into the guide channels on either side
of the camera body-red dots must be opposite
each other-so that the top edge of the back is
in line with the red dot (just as for removing the
back). Then push the back right home, and turn
milled ring (30) until the two red dots are no
longer opposite each other.
Fig. 1