
27
Functions
About the HDMI CEC Link
About the HDMI link function
The HDMI link function of this unit enables you to link the operation of equipment using the standard HDMI CEC
protocol.
This function can be used by connecting the unit with your HDMI-compatible equipment (such as TVs and players)
using an HDMI cable (supplied or not supplied).
To use the HDMI link function, the setting needs to be made on each connected device. For more information, refer to
the operating instructions of the connected equipment.
Some linked operations may be available on equipment connected to the unit via an HDMI cable even if it is not
recommended equipment. However, FORMOSA PROSONIC INDUSTRIES BERHAD shall not guarantee such linked
operations. Also note that some linked operations may not be available on certain types of recommended equipment.
When you change the connections or settings of HDMI-linked equipment, you should carry out the following:
• Turn on all the connected equipment and then turn the unit off and on again.
• Check every piece of connected equipment to make sure it is working.
The number assigned to each equipment may change depending on the connections.
Preparing HDMI CEC
Preparing HDMI CEC
Make the following preparations.
Connect the unit and HDMI-compatible equipment (such as TVs and players) using an HDMI cable (supplied or not
supplied).
Make the settings for the HDMI link function on each device.
• Make sure that the “HDMI LINK”
is set to “ON” for the unit. Turn on the HDMI link on the connected
equipment according to the relevant operating instructions.
What you can do with HDMI CEC
Use the TV remote for operations using this function. Operations and displayed items may vary depending on the TV type.
Refer to the operating instructions supplied with the TV connected to the unit.
Use the TV remote control to control the
AMP Sound; “Volume up/down”, “Muting”
Power OFF (standby) link
The unit turns off (or goes into the standby mode)
automatically if the TV is turned off (or set to the
standby mode). If any equipment that supports HDMI
CEC is connected via an HDMI cable, the equipment
also turns off (or goes into the standby mode).
Power OFF (standby)
Power OFF (standby)
HAV-R400G_R500G.indb 27
HAV-R400G_R500G.indb 27
11/10/2011 9:31:30 AM
11/10/2011 9:31:30 AM