24
If the ARC function of the HDMI jack is not
If the ARC function of the HDMI jack is not
in use
in use
If the unit is connected to an ARC compatible TV using
both HDMI and optical cables, priority is given to sound
via the HDMI cable. If you wish to listen to sound via the
optical cable, turn off the ARC function following the
steps below.
Perform the above Steps 1 and 2.
Press
to select “LINK ON”,
then press
.
Press
to select “ARC OFF”,
then press
.
“OPTICAL” lights up.
Adjusting delay between picture and
sound (A/V SYNC)
You can delay the sound using this function when the
picture is slower than the sound.
AV/SYNC can be set for each input jack type.
About input jack type
HDMI IN: HDMI 1, HDMI 2 and HDMI 3
Optical digital IN : TV and Optical Digital
Audio IN: Audio 1 and Audio 2
Individual settings can be made for TV and Optical Digital.
To return to the previous menu, press
.
1
Press
.
2
Press
to select “A/V SYNC”, then
press
.
3
Press
to select “SYNC AUTO” or
“SYNC SET”, then press
.
SYNC AUTO
When the unit is connected to an equipment with the
auto audio delay function via an HDMI cable, the
optimal audio delay is automatically set if “SYNC AUTO”
is selected.
(The mode is set to “OFF” when the unit is connected
to equipment with no auto audio delay function.)
SYNC SET
Select this mode to set the delay time. Move on to Step 4.
4
Press
to select “OFF” or delay
time.
If “OFF” is selected, the A/V SYNC function is not
activated.
The setting range is 10ms to 200ms in 10ms
increments.
Once the setting is completed, press
until the input
source such as “TV” and “HDMI 1” is displayed on the display
panel to end the menu.
Enjoying Dolby Digital sound at a low
volume (AUDIO DRC)
Compresses the dynamic range (difference between the
softest and loudest sounds in audio signal) for clearer
dialog even at a low volume level without affecting the
sound field.
This function is useful when you may not listen to the
sound at a high volume late at night.
To return to the previous menu, press
.
1
Press
.
2
Press
to select “AUDIO DRC”,
then press
.
3
Press
to select the setting item.
DRC OFF
Ordinary playback without compression of dynamic
range.
DRC AUTO
Compresses dynamic range according to the sound
source.
DRC STD
Compresses dynamic range at the standard level.
DRC MAX
Compresses dynamic range fully.
Once the setting is completed, press
until the input
source such as “TV” and “HDMI 1” is displayed on the display
panel to end the menu.
About delay time
• The unit of delay time is ms (millisecond). It is a unit to express time, which is a thousandth (1/1000) of a second.
HAV-R400G_R500G.indb 24
HAV-R400G_R500G.indb 24
11/10/2011 9:31:29 AM
11/10/2011 9:31:29 AM