19
Installation
Turning on the Power
After connecting your external equipment, turn on the
power of the unit.
Turning on the power for the first time
Turning on the power for the first time
1
Make sure that the POWER indicator
on the front panel is OFF, then press
on the unit.
The power turns on and the POWER indicator on the
front panel lights up green.
Make sure that the
POWER indicator is OFF.
Press
on the front
panel to turn on the power.
The POWER indicator
lights up green (ON).
Turning on the power for the second time
Turning on the power for the second time
onwards
onwards
1
Make sure that the POWER indicator
on the front panel is in standby mode (lit
in red), then press
on the remote
control.
The power turns on and the POWER indicator on the
front panel lights up green.
Make sure that the
POWER indicator is in
standby mode (red).
Press
on the remote
control to turn on the power.
The POWER indicator
lights up green (ON).
If
on the remote control is pressed while the power is
turned on, the unit goes into standby mode and the POWER
indicator lights up red.
If
on the unit is pressed, the power is turned off and the
POWER indicator turns off.
The power cannot be turned on by pressing
on the remote
control when the power is OFF (the POWER indicator: OFF).
About the power indicator and display panel
About the power indicator and display panel
The color of the power indicator varies depending on the
power status of the unit. If the brightness of the display panel is
changed
1
, the power indicator also changes accordingly.
Power status
Power
indication
Display
panel
CEC LINK
2
Power OFF (The
power is turned off
using the button on
the unit.)
OFF
OFF
N/A
Standby (The power
is turned off using the
remote control.)
ON (red)
OFF
YES
Power ON
ON (green)
ON
(standard)
ON (green/ dim)
ON (dim)
ON (orange)
OFF
1 The brightness of the display panel can be set to one of the three levels.
2 Refer to
for HDMI CEC Link.
About the remote control’s operating
range
Point the remote control at the remote sensor on the
unit.
Avoid exposing the remote sensor to intense light. The
remote control may not function under such a condition.
Do not place obstacles in the path between the remote
control and remote sensor. Otherwise, the remote
control may not work or will respond slowly.
Remote sensor
Within about 16 ft (5 m)
About 30º About 30º
From the remote sensor:
Distance – Within 16 ft (5 m) / Angle – Within 30˚ (horizontal);
Within 20˚ (vertical)
About the remote control
Do not drop, swing or apply impact to the remote control.
Do not splash water on the remote control or place it on a
wet object.
Do not disassemble the remote control.
Do not place the remote control in a place subject to high
temperature or humidity.
HAV-R400G_R500G.indb 19
HAV-R400G_R500G.indb 19
11/10/2011 9:31:27 AM
11/10/2011 9:31:27 AM